Vending machines and automobiles are some of the most common uses of the hydraulic vane pump. This type of pump is one of the most complicated, but it also provides a high degree of quality for anyone looking at using it for the right types of applications. Before selecting this kind of pump for your specific needs, or replacing a defective or damaged pump with a new one, it’s important to be clear on what you’re getting and which option is going to be the right one for your requirements. By understanding what hydraulic vane pumps offer and the different options you can choose from, you can select the right pump for any situation.
There are two types of hydraulic vane pumps, which are single-chamber and double-chamber. They can both be extremely effective for their applications, but they don’t offer the same type of experience. Deciding which one to choose will depend on the size of the pump needed, how it’s being used, and other factors. You’ll want to consider whether you need the opportunity to vary the displacement, for example, or whether a fixed level will be acceptable. That will affect which kind of pump you get and how well it works for the intended application.
When choosing a hydraulic vane pump, it’s important to decide whether a fixed displacement or variable displacement pump is the right choice. Having that flexibility only adds to the benefits of this particular type of pump. It’s important to keep in mind, however, that variable displacement capabilities are only going to be found on single-chamber pumps. A double-chamber hydraulic vane pump will offer only fixed displacement. The ability to vary the displacement on single-chamber pumps comes from screws that are adjusted to control the flow of fluid through the pump.
The hydraulic vane pump has been around for some time and was originally invented in the latter part of the 19th century. They work well in many types of industrial environments and are going to continue to be used throughout these environments into the foreseeable future. The pump has a central rotor which is turned by a drive shaft. A number of vanes are mounted around the outside of that rotor, and both the vanes and rotor spin inside of a ring. The ring is circular on the outside, but in the case of variable displacement pumps it may be cut in an elliptical fashion on the inside. That can allow for the changes in flow that are needed.
If you’re using low-viscosity fluids, vane pumps can be a perfect choice. They’re also the right option for anything that uses a lower level of pressure because high-pressure, high-viscosity fluids don’t work well with this type of pumping system. They also cost more than gear pumps due to their design and complexity. But they’re also highly efficient and have a low noise level and a high flow for their size. They’re easily serviceable and can provide a long period of quality and usage when properly maintained. All in all, a hydraulic vane pump is a good value.